Necklace’s

This unique unisex necklace has a name of a flower, it has beautiful green colours the same as this necklace. This necklace has three drops as the focal points of this necklace and they are made from lime green glass disk beads which are sat on top of 3mm blue/green AB glass beads on knotted head pins. The focal beads are strung on to the strung portion of the necklace so they dangle down below the beads. The strung portion of the necklace has strung on to it in a symmetrical pattern with one of the focal beads marking the centre of the strung portion. The beading starts on either side with  three 8mm amazonite round bead  gemstones then a silver stainless steel rondelle rhinestone clear spacer with the focal drops moving across them. The next set of beads are four 8mm  amazonite round beads gemstones with a 10mm clear faceted glass beads in the middle of the four amazonite beads. Then in the centre of the necklace where the middle focal is there is a silver stainless steel rondelle rhinestone clear spacer with the focal drop moving across it. The rest of the length of the necklace is two lengths of three pieces of faux leather braided together. The closure on the necklace is a silver stainless steel toggle clasp. The beaded portion of the necklace is 10 inches. The length of the necklace is 21 inches. The length of the necklace from the clasp to the base of the centre focal is 11 inches.

This necklace is splendidly gorgeous with a 30mm moss agate donut pendant that has been adapted into a handmade pendant using gold-plated wire and 4x3mm crystal faceted rondelle in crystal AB. The pendant is attached to the beaded necklace chain by the loop on the pendant. The necklace is a strung necklace and is  symmetrical, from the centre there are four 4x3mm corrugated round silver stainless steel metal spacers that the pendant bail rests on. In blocks of beads there are a section of 6mm tree agate matte round bead gemstones with  4x3mm corrugated round silver stainless steel metal spacers in between them. The second block of beads are 8mm moss agate round bead gemstones then again in between the block of  beads  are 4x3mm corrugated round silver stainless steel metal spacers. Then a section of 6mm tree agate matte round bead gemstones then again in between the section of beads are 4x3mm corrugated round silver stainless steel metal spacers. Then lastly a   sections of 4x3mm crystal faceted rondelle’s in crystal AB with 4x3mm then there is a corrugated round silver stainless steel metal spacers on the end. The closure on the necklace is a gold-plated magnetic pop clasp. The length of the necklace is 21 inches. From the clasp to the base of the pendant it is 13 inches.

This sumptuous double strand necklace is made from a mixture of a strand of strung beads, wire wrapped beads and chain. On the wire wrapped bead strand each of the beads are 8mm crackle agate faceted round beads in mystic blue gemstones that are linked together by jump rings. On the strung bead strand which is a symmetrical bead strand from the centre bead, in between each bead is a single 3mm silver stainless steel metal bead. In the centre of the strand is a 12x9.5mm crystal faceted oval bead in peacock blue bead. Then going up both sides of the strung strand are magnificent dark blue with opaque white dots with transparent medium blue dot on top of white are the lampwork beads. There is a sweet little 4mm crystal faceted bicone bead in light sapphire AB then another oval bead. There is a single 6mm lapis lazuli matte round bead gemstone, following on from that without a metal bead between these beads are two bicone’s dangling from the necklace strand by ball head pins and two further bicone’s strung on the strand before the next metal bead. Go on up the necklace on both sides are 5 exquisite 10x11mm glass tulip beads in violet blue with a metal bead in between each bead but not on the end of the row of these beads. The last 8 beads on the strand are the bicone’s without metal beads between them. To get the rest of the length of the necklace is silver stainless steel figaro chain. The closure on the necklace is a silver-plated lobster clasp with 2 inches of figaro extender chain with a 6mm lapis lazuli matte round bead gemstone dangle on the end of the chain. The length of the shorter strand is 21 inches. The length of the longer strand is 24 inches.

This is a  funky mixed metal choker. The choker has a large focal consisting of a large circular gold-plated ring that is 2 inches in diameter, dangling from the ring is 15 lengths of chain in silver stainless steel, you have a centre chain which measures 5 inches with a gold rhinestone beaded bead on the end of the chain. Then going out symmetrical to each side the chains have on the end beautiful beads, next to the centre chain those ones measure 4 inches with a elongating black oval faceted glass bead, the next chains measure 3.5 inches with a round 11.5mm black & white checkered board glass bead, the next chains measure 2.5 inches and have a round 7.5mm red faceted glass bead, the next chains lengths are 2.5 inches and have a round 11.5mm black & white checkered board glass bead, the next chains lengths are 2 inches with a transparent red oval glass bead, the next chains lengths are 1.5 inches with a rondelle measuring 8.5x11.5 and it is a black faceted glass bead, the next and last chains on the focal their lengths are 1 inch with a round 8mm faceted red glass bead. The Focal is attached to a length of silk ribbon by a silver-plated bail bead. The silk ribbon is a deep purple colour and gives a choker length of 16 inches around the neck, the closure on the choker are gold-plated ribbon end, a gold-plated lobster clasp and a 2 inch textured gold-plated stainless steel  extender chain with a red barrel glass barrel bead with white stars on it as a dangle on the end of the chain. The full frontal length of the necklace for the focal is 8.5 inches.

This chunky necklace falls at about around opera length. At the base of the necklace is a striking two hole acrylic bead that is black with a drizzle pattern done on it in white. Going up both sides of the necklace is 8mm matte red agate round beads with a random pattern  of peach, white, amber and clear glass rondelle beads in between the red agate beads. The length of the beaded portions are 3.5 inches. Attached to the beaded portion is two lengths of large link oval silver stainless steel chain. The closure on the necklace is a silver-plated lobster clasp with a 3 inch stainless steel silver extender chain with a small ball on the end as a dangle. The length of the necklace is 30 inches.

This gorgeous necklace has a large beautiful centre focal bead that is an ammonite shell bead with amazing detail and colour to it on both the front and back of the bead. Towards the front of the necklace you have Japanese Bamboo Carnelian Coloured Striped Barrel Beads and Orange AB Shell Beads on either side one ammonite and then further up one shell. Then to complete the necklace on both side there is a mixture of 6 translucent blue cube beads and 5 - 10mm round faceted blue beads in an alternate pattern. In between the beads are gold-plated findings. The necklace is fully symmetrical apart from the charms. To  complete the necklace as a closure is a gold-plated lobster clasp and a 2 inches gold-plated extender chain with a coral faceted round bead on a gold-plated head pin on the end of the chain. There is also a silver stainless steel starfish charm and a gold topped cream coloured mini leather tassel next to the clasp on the side of the lobster clasp. The length of the necklace is roughly 21.5 inches.

There is also a bracelet, anklet and pair of earrings that match this necklace all you have to do is put surfs up in front of each of them.

This beautiful simplistic necklace has a core of 0.5mm white CKC - Chinese Knotting Cord and the two spirals on either side of the centre matte  8mm clear AB bead are made up of 1mm silver CKC - Chinese Knotting Cord. On either side, on the ends of the spirals before the knots are sparkly red 8mm rhinestone beads. The closure is a 2 inches long sliding adjustable knot made up of square knots. When fully tightened it goes as small as 12 inches with 13 inch tails and on the end of the tails are 8mm sparkly red rhinestone beads which are the same beads that are on either end of the spirals.  If you wish for the length of the cords after the closure to be changed to a certain length and either the beads to be removed or stay on then after purchase please email either info@klwgjewellery.com or kels.lampworked.glass@gmail.com withe your order details, your request, to which item, the item number and SKU.

This beautiful simplistic necklace has a core of 0.5mm blue CKC - Chinese Knotting Cord and the two spirals on either side of the centre bead that is a matte white 8mm bead are made up of 1mm silver CKC - Chinese Knotting Cord. On either side, on the ends of the spirals before the knots are either end another matte white 8mm bead. The closure is an inch long sliding adjustable clasp made up of square knots using the silver CKC - Chinese Knotting Cord. When fully tightened it goes as small as 11 inches with 13 inch tails and on the end of the tails are 6mm matte rounds in holly berry and when at its full extension its length is 24 inches with only the 6mm beads on the ends.  If you wish for the length of the cords after the closure to be changed to a certain length and either the beads to be removed or stay on then after purchase please email either info@klwgjewellery.com or kels.lampworked.glass@gmail.com with your order details, your request, to which item, the item number and sku.

This lovely adjustable necklace is made upon a 1mm burgundy CKC - chinese knotting cord. The necklace is in a ‘Y’ format with in the centre a silver stainless steel Tree of Life circular pendant that is Lead free, cadmium free and nickel free. Then working up both sides of the necklace there are singular  8mm banded agate gemstones that are spaced out along the length of the cord with knots on either side of the beads and lengths of the burgundy cord showing beautifully between the banded agate gemstones. In between the slide clasp there is a white glass pearl to stop the knots coming together. The shortest length of the necklace is 30 inches and at the full length it is 34 inches. The clasp is very stiff on this and you do need to give it a bit of a pull. The length of the necklace from the glass pearl to the top of the pendant is 17 inches and with the pendant 18 inches and when at its shortest length it is 15 inches and 16 inches with the pendant. On the end of the clasp is on either side are 2mm transparent red beads. When fully closed down to the smaller size the necklace will still go over your head.

This beautiful delicate bracelet/necklace is made with strawberry quartz beads, freshwater shell beads and faceted glass rondelle beads in apricot w/ gold wash which are all connected together as links. This necklace/ bracelet converts from a double strand necklace to a bracelet and necklace. On the bracelet portion there is a 7/8x1/2 inch peach quartz pendant on the bracelet and on the necklace there is a strawberry quarts pendant that is 1x7/8 inch with 3 chunky strawberry quartz chips above it. The necklace is a ‘Y’ necklace and has  a frontal closure, with the detachable bracelet crossing across the neckline. The bracelet is connected to the necklace by two lobster clasps and when you take the bracelet off the necklace to wear you connect the lobster clasps together one lobster clasp hook into the hook of the other lobster clasp or if you need it smaller into the jump ring. All the metal on this necklace/bracelet is gold-plated. The closure on this bracelet/necklace- these are on the bracelet two gold-plated lobster clasps and on the necklace the closure is a gold-plated toggle clasp. Th length of the bracelet is 7 1/4 inches and the length of the necklace is 27 inches and from the base of the pendant to the centre bead at the back of the necklace it is 16 inches. To put this necklace on you have to undo one side of the detachable bracelet and unhook the toggle clasp then place round your necklace, then close the toggle clasp and re attach the detachable bracelet, unless you wish to wear the bracelet separately. If you wish for a 2 inch length of extender chain with a bead dangle on the end to be added in with this piece of jewellery for the bracelet, after you have paid, please contact either info@klwgjewelkery.com or Kels.lamworked.glass@gmail.com and inform us of your order number the SKU, the name if the item and your request and how long you wish the extender chain to be and if you want it with or without a bead on it

This bracelet can match this necklace/bracelet- Strawberry & Shell Bracelet

This stunning Picture Jasper and Jasper necklace is full of wonderful earthy colours is beautiful as a unisex necklace. Threaded onto this necklace are stunning earthy coloured rectangular picture jasper. Also threaded onto to this necklace are beautiful jasper round beads. In between the jasper beads there are 4mm citrine round beads, 3mm light blue AB bicone’s and 4x5.5mm copper corrugated metal beads. For the closure there  is a beautifully detailed copper flowery toggle clasp. The length of the necklace is 25 inches long and when worn from the toggle to the centre bead is 12 inches.

There is a matching bracelet on the website called Double Jasper Bracelet.

This lovely long adjustable unisex necklace has stunning colours that connect beautifully to nature with the beads and the CKC- Chinese Knotting Cord. Starting in the centre of the necklace there is a gorgeous focal pendant which is a silver stainless steel filigree leaf. Attached to the filigree leaf is a long length of 1mm thick forest green CKC - Chinese Knotting Cord. Along the length of the Chinese Knotting Cord there are Green faceted AB rounds measuring 11x9.5mm in sets of three, there are four sets on both sides, also there are three beads on the end of the cord after the closure. The closure is 55.5mm/2.18inches of square knots to make a slide closure with the same Chinese knotting cord. The length of the cord after the closure are around 6 inches long. If you wish for the length of the cords after the closure to be a certain length then after payment please email either info@klwgjewellery.com or kels.lampworked.glass@gmail.com withe your order details, your request, to which item, the item number and sku.

This luscious memory wire choker makes a statement when you wear it with its chain dangles with beads on the ends. The memory wire is silver and in the centre of the memory wire at the front there is a focal made up of 6 piece chain dangles hanging from the memory wire which is made up 6 pieces of silver-plated chunky chain at three different lengths with beads on the end. The focal consists of two silver-plated lengths of chain at 1 inch, 1 with a 14.5mm Lapis Lazuli bead on the bottom and one with a 13mm Labradorite bead on the bottom, then there is two 2 inch silver-plated chains with the same beads as the 1 inch chains, and two 3 inch silver-plated chains also with the same beads on the bottom. On either side of the focal the pattern is symmetrical, these beautiful beads consist of

•9mm Dark blue faceted fire polish

•8.5mm translucent light blue fire polish

•8.5mm silver-plated metal beads

•11mm matte Lapis Lazuli

•14.5mm matte Lapis Lazuli

•13mm labradorite.

With the larger and darker beads being at the front of the necklace and working towards the back the smaller and lighter beads apart from the two dark blue 9mm faceted fire polish being right next to the loops of the memory wire. The closure on the necklace is a silver-plated lobster clasp with a fine chain for an extender chain which has a 13mm Labradorite bead dangle on the end of the extender chain. The necklace size is a 15 inch necklace when at its tightness but hass a two inch extender chain on the necklace.

•There is a matching pair of earring on the website called Raindrops Earrings

This stunning ‘Y’ necklace is centred around the colour green with the a a large curved chunky silver foil green acrylic pendant. Then there is a lovely three strand copper filigree connector that has the pendant dangling off the centre of the connector and on either side of the connector there are three silver faceted fire polish glass beads. The chain of the necklace is made up of two part the first part is strung and made up of alternating gemstones and the same silver faceted fire polish glass beads that are on the connector between each gemstone, the gemstones are Amazonite & Flower Amazonite. Then the second half of the chain is actual chain which is copper chain. The closure to this necklace is a toggle clasp with a flower pattern on it in copper. The length of this necklace from the toggle loop to the toggle bar is 20 inches, and the length of the pendant is 4 1/2 inches long.

This necklace has a double strand of back onyx medium softflex as the core and it shows as part of the design of the necklace which is around the back of the neck, due to it being softflex it is still comfortable to wear tho. There is on  either side of the clasp working up toward the open back of of the softflex woven on to both strands and on to one strand in a pattern of three small beads then a large bead a pattern of colours and different size beads. The pattern of colours on both sides go in this order the first strand is white on both strands and green bicone bead on the single strand, a dark purple on both strands and an a amethyst faceted purple bead on both strands every three beads and the last section,a faceted orange round beads on the single strand that are darker than the three lighter beads on the two strands. The closure on the necklace is a leaf toggle clasp. Dangling off the leaf toggle clasp is a pendant made up of a black bead with colourful patterns on it and below that is a green sugar skull then a silicone rose and lastly at the bottom of the pendant is a dichroic triangle pointing down. Th length of this necklace from the leaf loop to the bar of the clasp is 28 inches long and the length of the pendant is 4 1/2 inches long.

This necklace has a stunning focal made up of a  Green Girls Studios “Love Is The Key” handcrafted pewter link, with 3 different colour wire wrapped bell flower dangle, dangling from the base of the link giving it a lovely spring feeling and extending the beauty of the link which is absolutely stunning. The necklace is made up of clear, blue and pink beads in different shapes and styles with a flower metal type spacer in between every bead. The clasp on this necklace is a silver-plated square toggle clasp. The length of the necklace from toggle loop to toggle bar is 19 inches and the length of the pendant portion is 3 1/8 inches long including the bell flowers and “Love Is The Key” link.

This gorgeous light blue centre tasselled necklace has an array of blue beads at the front of the necklace. On the tassel is a glitter bead that does not shed but bring a pop of shine to necklace. On either side of the necklace the beads are symmetrical as you go out you have, a large light blue faceted round bead, a pattern of dark the light blue faceted round beads repeated again with four small light blue beads between each of the beads. To connect the rest of the necklace there are two gold quick links at the bottom and two at the top. In between each of the quick links is a double strand of leather which is wire wrapped on to the quick link at the top using silver wire for the mixed metal feel, which is to go with the clasp for this necklace which is two jump rings on either side and a swirl toggle clasp. The length of this necklace from the toggle clasp loop to the toggle bar is 29 inches long.

This is a nice simplistic necklace. It has such a shine to it with the sections of silver-plated chain between the amber sea glass nugget  and white half gold barrel links attached to the chain. In the centre of of the necklace is a faux turquoise oval focal bead link. The closure is a silver-plated lobster clasp and loop with extender chain and dangle. The necklace is 30 inches from lobster clasp to loop and has an extender chain that is 2 inches long with an amber sea glass nugget on the end the dangle which is 3/4 inch long.

This spooky ‘Y’ shaped asymmetrical necklace can be worn all year round as has different shades of black in it with pops of colour, with the large ceramic brown beads which move up and down the dark black beads and different tones of silver beads. Starting in the centre all of these bead are thread on to medium onyx softflex beading wire, There  is a lovely detailed bat pendant with a grey & black marbled bead above it. Going off left and right the necklace matches as far as the clasp on the left side (as you look at the necklace). You have a short stretch of small black beads which brings you to two teardrop beads with the points pointing towards the centre of the necklace and the bat. After that you have another run of small black bead but with a large hole brown ceramic bead over the top of them and the bead moves up and down as a fidget bead on both sides.  Now three is a section where you have three small black beads then a slight bigger silver faceted bead and this run happens another two times before the clasp is placed on, on the left hand side with the loop attached to the beads with a jump ring and then attached to the bar via a jump ring  is doubled up black figaro chain. Carrying on up the right side is a length of small black beads with a brown ceramic bead on it for the fidget effect. Now we have a beautiful pattern with three small black beads in between each bead and that pattern is a faceted black round bead, a  vertical two tone silver wave pattern round bead and repeat again. After this is only a few more beads and that is a length of small beads with one of the large hole brown ceramic beads so you can fidget with it, a black faceted round bead and lastly one last run of small black beads with a brown ceramic bead on it to fidget. The closure is an antique bronze toggle clasp. Then the doubled up figaro chain is attach to the beaded portion of the necklace with a jump ring. The length of the necklace is 26 inches from toggle loop to toggle bar.