Larger Sized Jewellery/Jewelry

This is a woven bracelet using a single strand of lime green S-Lon split into two, with two types of gemstones and silver stainless metal beads. The two types of 6mm gemstones on this bracelet are Amazonite  and Serpentine. There are four dangles on this bracelet, you have the two on the ends of the S-Lon after it has been tied to the clasp and on both strands you have one each of the gemstones, the other dangles are a silver-plated tiny nicely detailed little mushroom charm and lastly a detailed silver-plated bat charm. The closure on this bracelet is a silver stainless steel detailed swirl hook and eye clasp. The length of the bracelet is 8.75 inches but wears like 8.25 inch bracelet.

This is gorgeous spring into summer bracelet. There are stunning blue magnesite oval oblong beads in a lovely blue. On either ends of the blue magnesite apart from the ends of the bracelet are beautiful silver-plated bead caps. In between each of the sets of bead caps and beads are delicately decorated butterfly beads. There is a 2 inch silver-plated extender chain that has one of the blue magnesite oval oblong beads on the end of it on a knotted head pin. For the closure of this bracelet there is a silver-plated lobster clasp. The size of the bracelet is 8.5 inches but wear like an 8 inch bracelet.

This simple and neutral piece still really pops. It is made from a silver stainless steel metal celtic focal which really works well with the beads on either side of it. Attached to each of the loops on opposite sides of the focal is a single strand of Purple S-Lon that is doubled over. On the purple S-Lon there is threaded clear crystals that have an AB (Aurora Borealis) finish on them, the pattern that the beads are in is three crystals then silver textured metal bead then three crystals then another metal bead then three crystals and then after all the beads there is a knot to hold them in place. The closure on this bracelet is an adjustable sliding clasp using square knot with the purple S-Lon, then on the ends of the for cords are silver textured metal beads. The size of this bracelet ranges from 7.5 to 13 inches.

This is an extra long lariat that will elongate your torso. The chain and findings on the lariat are silver-plated. There is a large hole bead that tops one tassle for a bit of flash. The tassels are made up of black suede, silver-plated wire, silver-plated bead cap, glass bead and a large hole resin bead. The to wear the lariat you wrap the chain round your neck at least twice. The length of the chain with the tassels is 83 inches long.

From a pet free and smoke free place studio and property. 

This is a woven bracelet using a single strand of Softflex beading wire split into two, with two types of crystals and silver stainless metal beads. The two colours of 6mm crystal on this bracelet are blue  and green. There is one dangle on this bracelet which is a silver-plated tiny nicely detailed little mushroom charm. The closure on this bracelet is a silver-plated lobster clasp with a two inches extender chain and the mushroom dangle is hung off the end of the chain. The length of the bracelet is 9 inches.

This wonderfully simplistic yet complexly detailed bracelet features a beautifully balanced Leather & Metal Pattern that can be worn all day and straight into a night out. Crafted from durable 1.5mm leather, this piece showcases a striking Leather & Metal Pattern with 13 ornate filigree metal beads strung along the leather cord, each separated by tight, handmade barrel knots.

At one end of this bracelet’s Leather & Metal Pattern, there’s a medium-sized loop followed by the decorative sequence of beads and knots. Once all 13 beads are placed, the Leather & Metal Pattern is finished with another medium loop and a final barrel knot to secure the structure.

To ensure security and ease of use, the bracelet fastens with a lobster clasp. The clasp is attached to one loop with a 4mm jump ring and hooks onto the opposite loop—completing the elegant Leather & Metal Pattern in a seamless, functional way.

Measuring 9.5 inches in length, this bracelet is ideal for larger wrist sizes or anyone who prefers a relaxed fit. The blend of strong leather and intricate metal elements creates a unique Leather & Metal Pattern that stands out in any setting.

This quirky charm bracelet is made from a gold chain that is 7.25 inches long with a 15mm soldered ring and a 2 inch extender chain with a 10mm transparent faceted bead for a dangle. There a seven different charms dangling off what are called Softflex loops which are full sealed beading wire loops, these are oversized for decoration. The seven charms are a yellow sunflower, a turquoise house with decoration, a blue & white bird, a red locket heart, a white star that reads dream, an old style sewing machine and a white bunny rabbit, all the charms are enamel colour. The length of the bracelet is 7.5 inches long and can go up to 10 inches with the extender chain. The bracelet can be resized to a smaller size depending on the size that you which it to be you may have to have one of the charms removed or have the charms closer together, if you wish for a smaller size after ordering contact us at kels.lampworked.glass@gmail.com with your order details, your request, to which item and the item number and sku.

From a pet free and smoke free place studio and property. 

This very sultry necklace is definitely one for an evening out, it will elevate any outfit you wear. This necklace has luxurious sunshine AB triangle crystals paired with beautiful 8mm malaysia jade english- cut round beads. At the top of the strand of beads befor the chain on each side there are three 6mm quartz faceted magenta cube beads to round out such gorgeous beads. The triangle beads are dangling from a 29x13mm mountain jade link. The rest of the length of the necklace is a double strand of 7.6x2.6mm gold coloured brass oval chain with the toggle clasp next to your collar bone. The length of the necklace is 34 inches.

From a pet free and smoke free place studio and property. 

This unique adjustable macrame bracelet is made from a core of gold painted wooden beads. This is a fishbone macrame bracelet using a 1mm silver coloured cord. The closure on this bracelet has for the adjustability a section of square knot so you can adjust the size, on the ends of the silver cord there are periot coloured 6mm bead on each strand. The size of this bracelet at it’s smallest is 6 inches and at it’s large is 13 inches.

This is a gorgeous knotted bracelet which has been knotted using two strands of blue S-Lon. The beads on this bracelet are light blue crystals and there is a knot between every bead which gives the bracelet a nice flow. The closure on this bracelet is a silver-plated lobster clasp with a 2 inch extender chain that has one of the light blue crystals on the end of it. The size of this bracelet is 9 inches but wears like an 8.75 bracelet.

This beautiful delicate bracelet/necklace is made with strawberry quartz beads, freshwater shell beads and faceted glass rondelle beads in apricot w/ gold wash which are all connected together as links. This necklace/ bracelet converts from a double strand necklace to a bracelet and necklace. On the bracelet portion there is a 7/8x1/2 inch peach quartz pendant on the bracelet and on the necklace there is a strawberry quarts pendant that is 1x7/8 inch with 3 chunky strawberry quartz chips above it. The necklace is a ‘Y’ necklace and has  a frontal closure, with the detachable bracelet crossing across the neckline. The bracelet is connected to the necklace by two lobster clasps and when you take the bracelet off the necklace to wear you connect the lobster clasps together one lobster clasp hook into the hook of the other lobster clasp or if you need it smaller into the jump ring. All the metal on this necklace/bracelet is gold-plated. The closure on this bracelet/necklace- these are on the bracelet two gold-plated lobster clasps and on the necklace the closure is a gold-plated toggle clasp. Th length of the bracelet is 7 1/4 inches and the length of the necklace is 27 inches and from the base of the pendant to the centre bead at the back of the necklace it is 16 inches. To put this necklace on you have to undo one side of the detachable bracelet and unhook the toggle clasp then place round your necklace, then close the toggle clasp and re attach the detachable bracelet, unless you wish to wear the bracelet separately. If you wish for a 2 inch length of extender chain with a bead dangle on the end to be added in with this piece of jewellery for the bracelet, after you have paid, please contact either info@klwgjewelkery.com or Kels.lamworked.glass@gmail.com and inform us of your order number the SKU, the name if the item and your request and how long you wish the extender chain to be and if you want it with or without a bead on it

This bracelet can match this necklace/bracelet- Strawberry & Shell Bracelet

This beautiful delicate bracelet is made with strawberry quartz chip beads and freshwater shell beads. In between the sections of the larger beads are 4mm yellow bicone’s. There is a peach charm dangle on the centre front of the bracelet. The closure on this bracelet is a gold-plated lobster clasp with an 2 inch gold-plated extender chain with a strawberry quartz chip bead on the end. The size of this bracelet is 8 1/4 inches  but wear like a 7.75 - 8 inch bracelet and with the extender chain 11 1/4 inches.

This necklace/bracelet can match this bracelet- Strawberry & Peaches Double Strand Convertible Necklace/Bracelet

This stunning beachy anklet has a transparent orange faceted round flat bead as the centre focal to the anklet. Going off to either side of the focal of the bracelet it is symmetrical and there are a mixture of  beautiful sun loving Japanese Bamboo Carnelian Coloured Striped Barrel Beads, as well as a large transparent ocean blue faceted round beads, there also is to add to the beachy vibe of the anklet a pair of sandy cream short barrel bead with a gold AB shimmer beads. In between the beads are gold-plated findings to bring out the colours in the beads. For the closure on the anklet there is a gold-plated lobster clasp with a two inch extender chain, with a coral coloured faceted round bead on a gold-plated head pin on the end of the chain. The length of the anklet without the extender chain is 11 inches.

There is also a necklace, bracelet and pair of earrings that match this necklace. To find these on the website add surfs up in front of the earrings and bracelet and to find these necklaces put surfs up ammonite in front.

Stunning double strand bracelet that will take you straight to the beach. It is very light to wear with one of the strands being 3 strands of 3mm suede leather braided together. The other strand has beautiful 10mm dark turquoise travertine squares with 9x6mm czech glass opalescent orange travertine faceted rondelles. In the centre of the beads is a transparent bright orange round pillow bead that has etch on the bead to give it a beautiful pattern. The metals on for the closure on the bracelet are in gunmetal all apart from the dangle which is a beautiful tierra cast antique silver sea snail charm. The length of the bracelet is 81/4 inches long.

From a pet free and smoke free place studio and property. 

This simple unisex loomed green and white variegated hemp cord bracelet has lots of personality. The beads down the centre of the bracelet of the cord are 8mm Alashan Agate (Dyed) Rounds. The closure on the bracelet is a dark coloured two holed flower button that goes in a button hole at the other end of the bracelet. In between the gap between the button and the bead there is a  lovely dangle that is a metal antique bronze four leaf clover with stem. The size of the bracelet is 9 inches.